Phytolite - Quadra Modular Grow 200 2.7 μmol/j


Phytolite – Quadra Modular Grow 200 2.7 μmol/j


Dear customer, to place your Phytolite order, you will need to proceed on the following e-commerce sites:

If you are a reseller:


Modular lamp for indoor cultivation. 

The special shape of the Quadra 200 has been carefully designed to efficiently illuminate your plants even in the peripheral areas of your growing area. Its original design allows it to be used in both small, medium and large individual grow boxes, as well as in medium and large grow chambers (clustering)

The Quadra’s profile is particularly low and this allows it to be positioned, if necessary, very high up near the ceiling of the grow box or grow room. The weight is also particularly low and therefore does not need to be anchored to particularly strong supports. Make sure, however, that the anchoring points to the ceiling or grow box are sufficiently strong.

We recommend using the supplied pulleys, which allow for easy vertical positioning with quick and simple height adjustments.

NB: Remember to leave the dimming control on the most convenient side, i.e. facing the threshold of the grow box.
The normal ventilation of the grow box/room is sufficient to ensure optimal cooling of Quadra.
You are now ready, you have successfully installed your Quadra(s) and you can start.


Germinate your seeds as recommended by your dealer and use Quadra wisely in the first few weeks. Not only is it not necessary to give the young shoots maximum emission, but this also wastes electricity and could even damage them. We recommend placing Quadra at least 50 cm away using low emission (approx. 25 % dimming).

As the shoots grow longer, you can increase the output gradually and always observe your plants. It is rare, but possible, to damage shoots with too much light intensity. Also take care that the seedlings do not ‘spin’, i.e. do not stretch too far. This is indicative of poor light. In this case, you have to increase emissions or bring Quadra closer to the peaks.

When the plants have taken on a deep green colour, you can maximise the output and/or bring Quadra closer to the tops. La distanza consigliata dalle cime è, a seconda delle piante e della loro taglia, fra i 30 ed i 90cm.

When the plants are flowering, you can, again with care and frequent visual inspection, bring Quadra up to 15 to 20 cm from the tops.
Be careful when spraying liquid products on the leaves: water droplets could become small lenses through which light could damage the plants. Be careful when spraying liquid products on the leaves: water droplets could become small lenses through which light could damage the plants.

Enjoy your cultivation!

Additional information

Weight4,3 kg
Dimensions54 × 54 × 3,6 cm

Usage information

Recommended area100×100 cm
Power consumedYes
Recommended dist. plant top30-90 cm
External Controller (1 to 15 units)Rj11 Controller (sold separately)
Quantity of manageable plants (dep. size)1 to 4 (according to size)
Equivalence with HPS lamps400W
Warranty5 years


Spectrum composition

Samsung 3000K288 pcs
Samsung 5000K240 pcs
Sanan 660 nm96 pcs
IR 730 nm12 pcs
UV 395 nm12 pcs

Technical Information

PAR efficency2.7
Power supplyMeanwell Driver
Fixture weight4.03 Kg
Fixture dimension54 cm x 54 cm x 3.6 cm
Thermal managementPassive
Lifetime70000 hrs
Input power supplyAutosensing 100-277V
Power consumption200 W
Amperage0.87 – 2.4 A
PCB Board Thickness1.6 mm
Thickness PCB Board support/cooling4 mm


Shipping contents included


Adjustable power supply
Quadra LEDx 1
Power cable1 x 180 cm
Suspension with carabinerx 2
Professional adjustable pulleysx 2
Rj11 cable (connection to controller)x 1
Manualx 1

Additional info

Weight4,3 Kg
Dimensions54 x 54 x 3,6 cm
TypeLED Boards
BudgetUpgradeable | Professional
UsageFull Cycle

you might be interested in...

Related products

Open chat
🇮🇹 Ciao! 👋
Stai contattando l'assistenza Phytolite.
Hai bisogno di aiuto?
🇬🇧 Hello! 👋
You are contacting the Phytolite support.
Need help?